LANServer250B Revision 1.50
03/22

1.  Added SetC0OffsetInKHz to allow each 250B to measure C0 at a slightly different frequency to reduce coupling.

LANServer250B Revision 1.40
10/21

1.  Support up to 8 PCs (clients).

LANServer250B Revision 1.30
07/20

1.  Added support for the command DisableGraphUpdate which also controls the status update in LANServer.
2.  Reduced the overhead associated with command processing.

LANServer250B Revision 1.21
05/20

1.  CRC calculation on serial data included length which is was correct.

LANServer250B Revision 1.20
03/20

1.  Added an INI variable to enable a serial port option so that commands can be sent in data packets instead of via OLE.

LANServer250B Revision 1.14
08/18

1.  Fixed bug in last version that would not let it start up properly.

LANServer250B Revision 1.13
08/18

1  Solution in 1.10 for GetResults did not fully work.  Corrected that.

LANServer250B Revision 1.12
08/18

1.  Solved a problem with detecting the software key.
2.  View size at startup now shows entire window (no scroll bars).
3.  Software key errors now reported in dialog box.

LANServer250B Revision 1.11
08/18

1.  Corrected an error in th last revision that would cause a crash when OLE commands were accessed.
2.  Corrected an incompatibility issue with software keys.
3.  This release includes a new LANServer250BDLL to access the EnableRawOutput function.
4.  This release includes a new LANServer250BClient project demonstrating the GetBinNumberII and EnableRawOutput functions.

LANServer250B Revision 1.10
08/18

1.  Added Output Raw Data to the Miscellaneous menu and added an OLE command to turn it on and off too.
2.  When a command is not recognized, now including the command in the error statement.
3.  Corrected a problem with GetResults when more than 15 test types were being measured.  Data was being truncated.  Now will handle up to all 30 test types.

LANServer250B Revision 1.05
06/18

1.  Corrected an issue with GetBinNumberII that occurred when one PC took longer to measure than the other.

LANServer250B Revision 1.04
06/18

1.  Increased the timeout for HandleGetBinNumber so longer measurements can complete and a bin number will be returned in those cases.
2.  If the following commands time out, the returned result is now "Timed Out" instead of blank: Measure, GetBinNumber, CalibrateShort, CalibrateLoad, CalibrateOpen, CalibrateSave, and VerifyCalibration.
3.  Added GetBinNumberII which will now return "Measuring" if the 250B is still measuring when the call is made.
4.  Added IsMeasuring.

LANServer250B Revision 1.03
05/18

1.  Modified the timeout for several commands to be more reasonable.  Most notably changed the timeout for measurement completion from 5 seconds to 30 seconds.

LANServer250B Revision 1.02
05/16

1.  Corrected the way the calibration commands were handling multiple 250Bs.
2.  Added the ability to set serial numbers.
3.  Added the ability to verify calibration.

LANServer250B Revision 1.01
04/16

1.  Corrected a problem with CalibrateSave and CalibrateCancel.

LANServer250B Revision 1.00
03/16

1.  Initial release.