LANClient250B Revision 1.20 03/22 1. Added SetC0OffsetInKHz to allow each 250B to measure C0 at a slightly different frequency to reduce coupling. LANClient250B Revision 1.10 07/20 1. Added support for DisableGraphUpdate which not only disables the 250B updates, but also the LANClient status updates. 2. Reduced overhead for command processing. LANClient250B Revision 1.04 08/18 1. Corrected an issue when measuring from the first 250B only that could result in the wrong 250B being used. LANClient250B Revision 1.03 06/18 1. Made PC number easier to read by increasing the size of the box around the LEDs. LANClient250B Revision 1.02 06/18 1. Added GetBinNumberII which returns "Measuring" if the 250B is still measuring. If not, it returns the bin number like GetBinNumber. 2. Added IsMeasuring. LANClient250B Revision 1.01 05/16 1. Added the ability to set serial numbers. 2. Added the ability to verify calibration. LANClient250B Revision 1.00 03/16 1. Initial release.